Removing Side Panels on Rocket Espresso Machines
This entry was posted on April 14, 2014.
One of the things we love the most about Rocket Espresso Machines is their beautiful and shiny stainless exterior. This casing is actually handcrafted in Italy, which makes each machine even more unique. However, a little known feature about these cases is that you can actually take them off fairly easily.
Why would you want to do such a thing? Even if your local delivery company takes every precaution into consideration when transporting your machine accidents do happen and sometimes a case gets damaged. As a side note, if you ever have to ship your machine for any reason, make sure to check out the handy shipping guide we’ve created to help ensure your machine stays in good shape while traveling. Anyhow, if you do find yourself with a damaged case you may want to order a new one to replace it with and you will need to know how to remove the old one. Or, if you’re really tech savvy, sometime you may want to work on the internals of your machine and will have to take the side panels off to access it.
Removing the side panels varies slightly for the different versions of each machine, but there are some aspects that are the same no matter what machine you have. The tools you need are a screwdriver, 7-millimeter wrench, socket set and an extension bit. Before you start to take off the side panels it is important that you make sure the machine is powered off and cold, and that you remove all of the accessories such as the lid, water tank, drip tray and portafilter.
When it comes to locating and removing and loosening the screws and bolts is where things start to change per machine. Once you have located and removed or loosed the screws on the top of your machine, the first part of the process will be to remove the cup warmer, water tank and then remove the diffuser plate. The next step is to locate the bolts on the sides, bottom and/or back of the machines and loosen them to remove the side panels. On Cellini V1, you can take the entire case off at once by standing at the back of the machine, grabbing the front casing (you will have to pull to two sides apart a bit to get around the internals of the machine) and then pulling it back toward you. On the Giotto, you can remove each side panel one at a time, for whichever side of the machine you need access to.
To see specific instructions for the Rocket Cellini and Rocket Giotto, watch as our repair tech Jeremiah takes the side panels off both machines. If you’re still not sure about taking the case off your Rocket Espresso machine yourself, we’re always here to help! Just let us know any questions you may have.