(Not so Scientific) Experiment: Cappuccinatore on the Intelia Focus
We love the fact that the Intelia Focus (also known as the black version of the Intelia) is energy efficient and has vibrating finger guard to quickly and painlessly send our beans down the grinder chute. However, we’ve long wondered if it is possible to use a cappunccinatore on this machine to froth your milk as you can on its stainless steel brother and the Intelia Cappuccino. Don’t get us wrong; we do like the panerello that comes with this machine, since it does allow for slightly more controlled milk frothing. Yet, since the Intelia Focus is superautomatic machine, there are some of us that wish the entire process was automated.
For people who aren’t familiar with the cappuccinatore, it is a hose-like attachment that travels from the milk frothing pitcher with your milk to the milk frother inside your machine. The milk is then sucked up from the container, frothed in the machine and finally dispensed in your cup. Before we tested the cappunccinatore on the Intelia Focus, we wanted to see how well it worked on a machine the cappunccinatore is built for, so we started our experiment on the Intelia Cappuccino. The milk this little frother produced was surprisingly hot, around 173 degrees Fahrenheit according to our Fluke temperature probe. After this impressive result we decided to repeat the experiment on the Intelia Focus. Since the Focus has the same internals as the Intelia Cappuccino, we had a good feeling about how this test would turn out. As expected, the cappuccinatore did indeed work on the Focus. We were surprised to find that the temperature of the milk produced was considerably cooler, however, coming in at about 140 degrees Fahrenheit on our thermometer. We’re not sure why there is such a huge difference in temperature, but were excited to that our experiment worked, since having more options is an always an advantage. Check out our video with Gail and Brendan to see how the cappuccinatore works on Intelia Focus for yourself.