Tech Tips: SCG’s Tune Up Kit for Pasquini Livia G4
This entry was posted on July 18, 2014.
Not only does the shiny Pasquini Livia G4 espresso machine look beautiful on your counter, but it is also a workhorse of a machine. The Livia produces consistent shots time after time and it is heat exchanger, meaning you can steam your milk and brew your coffee at the same time. As a result, you can expect to spend a lot less time on whipping up your favorite lattes. With more time on your hands, perhaps you’ve thought about giving your machine some extra TLC in return, to ensure it continues to fuel your caffeine habit. A good deep cleaning is a great place to start, and you should also take stock of the some the parts on your machine. If you have noticed that your coffee has been tasting off recently or the pump has been working harder when you are pulling a shot, coffee residue has built up on your brew screen and its time to replace it. Likewise, if you see water or coffee pouring over the edge of your portafilter when you are pulling a shot, it means your brew gasket is no longer sealing properly and needs to be replaced as well. Luckily, SCG’s Tune Up Kit for Pasquini Livia G4 fixes both of these issues. Do keep mind that the parts on this kit are slightly different that those that were used on the original Livia 90. Therefore, if you have an earlier model of the Livia this kit won’t work for you.
The kit includes a brew head screen, a brew head gasket, a shower screen screw and a Cafiza cleaning tablet (to use to clean your diffuser and portafilter basket). The process for installing SCG’s Tune Up Kit for Pasquini Livia G4 is similar to that of the other tune up kits we have created. First, you will want to remove all accessories on the machine as well as the drip tray, drip tray grate, water tank, water tank lid, the cup warmer panels and the portafilter. This will prevent any of stainless steel pieces on the machine from getting scratched (as they have been removed) so your machine can continue looking shiny. Next you will your machine over and remove the components of the brew head – the brew screen screw, the brew screen, diffuser and the brew head gasket.
You will want to clean the diffuser, the portafilter basket and the brew head screen (if you want to keep an extra around as a spare) by soaking in hot water mixed with the included Cafiza packet. You should also clean up any coffee residue that had built up around your machine’s brew head. Use something like a small vacuum cleaner attachment or a can of compressed to blow all of the coffee out of the brew head. It is important that you get the brew head really clean before you install the new gasket since coffee is acidic and will start eating away at the gasket instantly.
The final part of the process is to reinstalling all the new pieces in your tune up kit. Replace the pieces in the reverse order you removed them, starting with the brew gasket and finishing with the brew screen screw. Once you have completed this process, insert your portafilter into the machine to make sure everything is aligned, and you are done! Ready try out SCG’s Tune Up Kit for Pasquini Livia G4 on your machine? Let Brendan walk through all the steps as he completes the process himself. It really is easier than you might think.