Morning Maintenance: CC1 General Maintenance Tips
An espresso machine is a lot like a car. If you keep up on your oil changes and tire rotations, it is going to last a whole lot longer. But don't worry, you won't need to bring your espresso machine into a mechanic for the tune up! You can do so in the comfort of your own home.
Below are our general maintenance tips for the Crossland CC1, but a lot of this information can be used on any single boiler machine. Of course it is best to consult your specific machines instruction manual but feel free to follow along!
The best thing you can do for your machine is to use filtered water. By using filtered water you cut back on the amount of descaling you will need to do, which is good for everyone involved. (It can take a while to go through the whole descaling process!)
Backflushing is another important step to a healthy machine. Coffee has oils, and those oils like to go everywhere! Over time, those oils will build up and can change the flavor of your shots or even create a clog. Watch the video below to see Gail demonstrate how to properly backflush the Crossland CC1.
After each brew session, it is best to wipe down the machine immediately. Especially the steam wand if you steamed some milk. Any milk residue that is left on the wand after steaming will burn, and be very difficult to remove later. In addition to the unsightly burnt milk, the wand can also siphon milk back up and into the boiler as it cools. And milk in the boiler is never a good thing (and can cost a lot to repair)!
Those are our general maintenance tips for the Crossland CC1, be sure to watch the full episode of Morning Maintenance below. If you found this video helpful, subscribe to our YouTube channel for videos just like this!