What is the throat diameter and overall height? Thank you
A shopper on Aug 13, 2014
Best Answer:This Replacement Bean Hopper with Lid for the Macap M4 is about 6" high without the lid and 6 3/8" with the curve of the lid included. The collar/throat is 5/16" across and about 1 1/8" high.
This is an excellent grinder. Take the finger guard off to remove excessive left over grinded coffee - I use a un-used popsicle stick. Mark the zero point and understand you will have to change the grind on different beans, and different age the beans. It can "choke" the best espresso machine out there, so it is capable of the finest grind. Other grinders can do better, however they will cost much, much more. Definite alterative to any Mazzer out there, with less cost. You should have reserve beans to reduce / eliminate popcorning of reservoir beans, and tiem the grind to get the proper amount of ground coffee. I removed the reservoir, and placed a 2 inch PCV pipe for the reservoir.
Before you spend an "arm and leg" against a much higher end grinder, start with a Macap M4, and you will be at a great start and end point.
Easy To Clean
Noisy (Posted on 6/1/2011)
Love my grinder and it looks beautifulReview by Kjay
just a bit messy when dispensing but not a big deal.
(Posted on 6/18/2010)
As good as it getsReview by Lets Make a Deal
The Macap stepless grinder is a joy to use. Takes a little trial and error to get the grind just right. Once you do it just does it right every time. Easily tweakable for that perfect shot when changing beans. We love it. It looks great on the counter and it is quiet when grinding.
Easy To Use, Commercial Grade, Great Taste
(Posted on 3/19/2010)
Write Your Own Review
You may also be interested in the following product(s)