Breville Barista Express Product User Manuals And Instructions PDF

FIRST USE

Initial Start Up

• Ensure the water filter is securely fitted inside the water tank.
• Fill the water tank with cold, preferably filtered water up to the MAX mark. When replacing the water tank, ensure to push down completely to lock into place.
• Ensure the hopper is locked into position.
• Plug the power cord into a 110/120V power outlet.
• Press the POWER button to switch the machine on. The POWER button light will flash while the machine is heating.
• A pumping sound will be heard. This is normal.
• When the machine has reached the correct operating temperature, the POWER button light will stop flashing and all button lights on the control panel will illuminate. The machine is now in STANDBY mode, ready for the next step ‘Flushing The Machine’.
• A pumping sound will be heard. This is normal. • When the machine has reached the correct operating temperature, the POWER button light will stop flashing and all button lights on the control panel will illuminate. The machine is now in STANDBY mode, ready for the next step ‘Flushing The Machine’.

Flushing the Machine

It is recommended to complete a water flushing operation, without ground coffee, to ensure the machine has been conditioned. When the machine has reached STANDBY mode, follow these steps:

1. Press 2 CUP button to run hot water through the group head.
2. Position the steam wand tip over the drip tray. Rotate the STEAM/HOT WATER dial to the STEAM position and run steam through the steam wand for 10 seconds.
3. Rotate the STEAM/HOT WATER dial to the HOT WATER position and run water through the hot water outlet for 10 seconds.
4. Repeat steps 1–3 until the water tank is empty.