Introduction
To fully benefit from the support that Philips offers, register your product at www.philips.com/registeryourcoffee.com. Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference.
Brewing Drinks
- Fill the water tank with tap water and fill the bean hopper with beans.
- Insert the small plug into the socket located on the back of the machine. Insert the mains plug into the wall socket.
- Press the on/off button to switch on the machine. The machine starts heating up and performs the automatic rinsing cycle. When all lights in the drink icons light up continuously, the machine is ready for use.
4. Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to adjust its height to the size of the cup or glass you are using.
Brewing Coffee with Beans
- To brew a coffee, tap the drink icon of your choice or tap the 'More Drinks' icon (specific types only). You can now adjust the drink to your personal taste. Use the up and down arrows to adjust the coffee strength. Tap the OK icon if you want to adjust more settings.
2. Press the start/stop button at any time to start brewing the selected drink.
3. To stop dispensing coffee before the machine is finished, press the start/stop button again.
Brewing Milk-Based Drinks with LatteGo (Milk Container)
- To assemble LatteGo, first insert the top of the milk container under the hook at the top of the frame. Then press home the bottom part of the milk container. You hear a click when it locks into place.
- Slightly tilt LatteGo and put it on the hot water spout. Then press it home until it locks into place.
- Fill LatteGo with milk. Do not fill the milk container beyond the maximum indication. If you have personalized the milk quantity, you may need to fill the milk container with more or less milk than indicated for this drink on LatteGo. Always use milk coming directly from the fridge for optimal results.
- Place a cup on the drip tray.
- Tap the milk-based drink icon of your choice or tap the 'More Drinks' icon (specific types only) to select a different drink (see 'Personalizing drinks'). You can now adjust the drink to your own preference.
6. Press the start/stop button. When you brew cappuccino, flat white or latte macchiato, the machine first dispenses milk and then coffee. When you brew caffè latte or café au lait, the machine first dispenses coffee and then milk. To stop dispensing milk before the machine has dispensed the preset amount, press the start/stop button.
7. To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and hold the start/stop button.
