Technivorm Moccamaster KBTS Coffee Maker Product User Manuals And Instructions PDF

Directions for use

1. Fill the water container to the required level with cold water (the marks show the nr. of cups).
2. Place a nr.4 filterpaper in the filterholder. Fill it with the required amount of coffee and shake it level. For 10 cups, use 5 or 6 spoons of coffee. For fewer cups, use proportionally more coffee.
3. Place completed filter holder on the filter bracket, turn chromium outlet pipe over centre of filter holder and place the lids of cold water container and filter holder.
   Caution: Scalding may occur if any of these parts are removed during brewing cycles.
4. Place the thermo jug without lid underneath the filter holder. We advise to rinse the thermo jug with hot water before use.
5. Switch the machine on by means of the ON switch. The orange light will come on when the thermojug is properly placed.
6. The water will now be brought gradually to the boil and will start to pass through. As soon as the brewing process is ready, you can take away the thermojug. The filterholder can remain on the filterbracket.
7. The filter holder can be closed should you wish to serve a cup of coffee before the filter process is completely ended.
8. Coffee tastes best immediately after it has been made. Do not wait too long before
9. You can keep the coffee warm for a longer time in the thermojug.
10. The machine should be switched off after use.

Daily maintenance of the coffeemaker

Clean the machine regularly with a moisty cloth and wipe dry afterwards. After use, clean the thermojug and filterholder in hot water and your usual detergent. Rinse thoroughly in hot water. Never place the machine in a liquid entirely or partly, nor use a very wet cloth.