Tech Tips: SCG’s Tune Up Kit for the Saeco Poemia

If you’re a new at home barista, the Saeco Poemia espresso machine is probably your new best friend. Not only is the machine is easy to use, but it is also very forgiving of those who are still learning. The pressurized portafilter means there is no need to perfectly tamp your espresso and the panarello wand makes milk frothing a breeze too! With this compact and stylish machine by your side you will be making lattes in no time! However, what happens if, heaven forbid, your best friend eventually starts to act funny? For instance, you may notice that coffee or water is pouring over the top edge of your portafilter when you pull a shot on your machine. While this sounds scary, never fear, this is not the end of your relationship. All it means that your brew head gasket is no longer making the seal between the brew head and the gasket, which can easily be remedied by using SCG’s tune up kit for the Saeco Poemia. The tune up kit comes with five parts: a brew head gasket, brew screen and screw, boiler spring and boiler valve. It is easiest to install these parts by flipping the machine over, but before you do this you will want to remove all accessories so they don’t get in your way while you are working on the machine. Once you have flipped your machine over, the next step is to remove the worn out parts so you can replace them. You should remove them in the following order: 1) brew screen 2) boiler bushing – make sure keep this piece close at hand since there is no replacement part included in kit 3) boiler spring and boiler valve and last, but not least 5) the brew head gasket. After you have removed all the old parts, make sure to clean and remove any coffee grounds that have gathered around the brew head. You may even have to flip your machine right side up again to get all the grounds out. However, it is really important to make sure all of the grounds are removed since coffee is acidic and will eat away at your brew head gasket. Once you have give your espresso maker a thorough cleaning, you can begin installing the replacement parts from SCG’s tune up kit for the Saeco Poemia in your machine. You should install the parts in the reverse order that you removed them, so start with the brew head gasket. When you have installed the new parts and reassembled you espresso machine, you can then double check your work by inserting your portafilter into the machine to make sure that it lines up properly. Knowing it is time to give your beloved Saeco Poemia some maintenance isn’t always as dramatic as having coffee leaking over the side of your portafilter. Some other signs that it is time replace these parts are if you hear your pump working harder than it used to. This can happen if you have so much coffee residue built up on your screen or portafilter, so that your pump does actually have to work harder to get through that pressure. Or you may find that your coffee just tastes off and you’re having trouble noticing a difference in taste between different blends of coffee. This could also be due to the fact that you have a lot of coffee residue built up that is affecting the taste of your shot. Luckily, SCGS’ Tune Up Kit for the Saeco Poemia can resolve all of these issues, and the installation is actually relatively painless. For more detailed instructions, watch as Brendan walks us through the process step-by-step. Your old friend will be up and running again before you know it!

Tech Tips: SCG's Tune Up Kit for the Saeco Poemia