Breville Barista Pro Product User Manuals & Instructions PDF

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging materials attached to your espresso machine. Ensure you have removed all parts and accessories before discarding the packaging. Remove the packaging and the plastics bags containing the water filter and water filter holder.

Clean the water tank, portafilter, filter baskets, milk jug and drip tray using warm water and a gentle dish washing liquid. Rinse well, then dry thoroughly before reassembling.

INSTALLING THE WATER FILTER

• Remove the water filter and water filter holder from the plastic bag.
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Set the reminder for next month of replacement. We recommend to replace the filter after 2 months.
• Insert the filter into the filter holder.
• Install the assembled filter holder in the water tank, ensuring it is clicked into place.
• Fill the water tank with cold water before sliding back into position on the back of the machine and locking into place.
• Refer to Care & Cleaning on page 18 for further instruction on installing the filter.

FILLING THE WATER TANK

• Ensure the water filter is securely fitted inside the water tank.
• Use the handle at the top of the water tank to assist in lifting it up and away from the machine.
• Fill the water tank with cold potable tap water to below the MAX marking indicated on the side of the water tank.
• Replace the water tank back on the machine, pressing down to ensure that it is properly positioned and attached to the machine.

FIRST USE CYCLE

A first use cycle must be completed before the initial use of the machine. The first use cycle rinses the machine and primes the heating system.

1. Fill the water tank.
2. Ensure machine is fully assembled with the bean hopper, drip tray and water tank securely attached to the machine.
3. Press the POWER button. The machine will beep and go into FIRST CYCLE mode.
4. The LCD will display FLUSH and the 1 CUP button will be illuminated.
5. Press the 1 CUP button. The LCD will show a count down for the remaining time of the f irst use cycle.
6. Once complete, the machine will go into READY mode.