Saeco Intelia One Touch Product User Manuals & Instructions PDF

Machine installation

1. Remove the drip tray with grill from the packaging.
2. Remove the machine from the packaging.
3. For best use, it is recommended to: Choose a safe, level surface, where there will be no danger of overturning it or being injured. Choose a location that is suffi ciently well-lit, clean and near an easily reachable socket. Allow for a minimum distance from the sides of the machine as shown in the illustration.
4. Attach the drip tray with grill to the machine. Make sure it is fully inserted. Note: The drip tray collects the water that comes out of the dispensing spout during each rinse/self-cleaning cycle as well as coffee that might be spilled during beverage preparation. Empty and clean the drip tray daily and each time the full drip tray indicator is raised. Caution: NEVER remove the drip tray when the machine has just been turned on. Wait a couple of minutes, since the machine will carry out a rinse/ self-cleaning cycle.
5. Remove the water tank.
6. Rinse the water tank under fresh water.
7. Fill the water tank with fresh water up to the MAX level and reinsert it into the machine. Make sure it is fully inserted. Caution: Never fill the water tank with warm, hot, sparkling water or any other liquid, as this may cause damage to the water tank and the machine.
8. Remove the coffee bean hopper lid and slowly pour the coffee beans into the coffee bean hopper. Note: Do not pour too many coffee beans into the coffee bean hopper as this will reduce the grinding performance of the machine. Caution: Only coffee beans must be put into the coffee bean hopper. Ground coffee, instant coffee, caramelized coffee or any other object may damage the machine.
9. Put the lid on the coffee bean hopper.
10. Insert the plug into the socket located on the back of the machine.
11. Insert the plug of the other end of the power cord into a wall socket with suitable power voltage.
12. Switch the power button to “I” to turn on the machine. The display shows the stand-by icon.
13. To turn on the machine, simply press the “ ” button. The display indicates that the circuit must be primed.