Saeco Royal Exclusive Product User Manuals & Instructions PDF

Saeco Royal Exclusive Type SUP015

Use and Maintenance Booklet

We congratulate you for having bought this top- quality espresso machine and thank you for choosing Saeco.

Before operating the machine, we recommend to read the following instructions thoroughly which explain how to use, clean and maintain the machine.

Dear Customer,

This fully automatic coffee machine allows the brewing of either espresso or normal coffee, using both bean and pre-ground coffee. This coffee machine, as all electric appliances, must be used with particular caution to avoid harm to people or damages to the machine itself.

Before starting the machine, carefully read the following instructions and always observe the safety norms contained herein.

• Never use the machine without water or coffee beans. 
• Remove measuring spoon, brush and the central unit key from the coffee grounds container and keep them within reach.
• Unwind the power cord from the rear side of the machine.
• The bean coffee container is attached with two screws. Remove the cover and fill it with coffee beans (approx. 300 g), then replace the cover.
• Adjust grinding by means of the grind adjustment lever, positioning it on point 5 of the scale.
• Remove the water tank from the machine, remove its cover and fill it with cold water (approx. 2.4 l). A valve on the tank bottom prevents water from escaping.
• Before installing the water tank in the machine, make sure the coffee bean container cover is properly fitted.
• Install the water tank, slightly pressing over it to fit the valve which will open automatically. Replace the cover on the tank.
• Connect the plug to the socket and press the main switch.
• The display shows “Warming Up”. Should “Energy Saving” be displayed, press the energy saving switch to deactivate the energy saving mode.
• Direct the steam/hot water dispensing tube over the drip tray. Place a cup or another suitable container under the dispensing tube, then turn the steam/hot water knob counterclockwise. The pump starts automatically. Wait until a regular water jet is obtained, then close the knob. The machine is now drained and ready to work.