Preparation
Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialized dealer.
You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).
Espresso, coffee and other specialty coffees
Ristretto, espresso, coffee and special coffee are all prepared following this model.
Example: Proceed as follows to prepare one coffee.
Precondition: The start screen is displayed.
- Place a cup under the coffee spout.
- Press the ‘Coffee’ button. Preparation starts. ‘Coffee’ and the coffee strength are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your JURA is once more ready for use.
Two specialty coffees
To prepare two specialty coffees, press the appropriate preparation button twice (within approximately 1 second).
Example: Proceed as follows to prepare two espressi.
Precondition: The start screen is displayed.
- Place two cups under the coffee spout.
- Press the ‘Espresso’ button twice (within 1 second) to start preparation. ‘2 espressi’, the preset amount of water flows into the cups. Preparation stops automatically. Your JURA is once more ready for use.
Adjusting the grinder
You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.
NOTICE
You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment wheel could be damaged.
Only adjust the consistency of grind when the grinder is running.
The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind during the preparation of an espresso.
- Place a cup under the coffee spout.
- Open the cover of the grinder adjustment switch.
- Press the ‘Espresso’ button to start preparation.
- Turn the grinder adjustment switch to the desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.
- Close the cover of the grinder adjustment switch.
