Saeco Exprelia Product User Manuals & Instructions PDF

Machine Installation

1. Remove the drip tray with grill from the packaging.
2. Remove the machine from the packaging.
3. For best use, it is recommended to:
   Choose a safe, level surface, where there will be no danger of overturning it or being injured.
   Choose a location that is sufficiently well-lit, clean and near an easily reachable socket.
   Allow for a minimum distance from the sides of the machine as shown in the illustration.
4. Attach the drip tray (external) with grill to the machine. Make sure it is placed correctly.
   Note: The drip tray collects the water that comes out of the dispensing spout during each rinse/self-cleaning cycle as well as coffee that might be spilled during beverage preparation. Empty and clean the drip tray daily and each time the full drip tray indicator is raised.
   Caution: NEVER remove the drip tray when the machine has just been turned on. Wait a couple of minutes, since the machine will carry out a rinse/ self-cleaning cycle.
5. Open the lid and remove the water tank by the handle.
6. Rinse the water tank under fresh water.
7. Fill the tank with fresh water up to the MAX level and re-insert it into the machine. Make sure it is fully inserted.
   Caution: Never fi ll the water tank with warm, hot, sparkling water or any other liquid, as this may cause damage to the water tank and the machine.
8. Open the lid of the coffee bean hopper and take out the inner lid.
9. Slowly pour coffee beans into the hopper. Put the inner lid back and close the lid.
   Note: Do not pour too many coffee beans into the coffee bean hopper as this will reduce the grinding performance of the machine.
   Caution: Only coffee beans must be put into the coffee bean hopper. Ground coffee, instant coffee, caramelized coffee or any other object may damage the machine.
10. Insert the plug into the socket located on the back of the machine.
11. Insert the plug on the other end of the power cord into a wall socket with suitable power voltage.
12. Switch the power button to “I” to turn on the machine.
13. This page will be displayed. Select the desired language by pressing the scrolling buttons “ ” or “ ”.
14. Press the “ ” button to confi rm. Note: If no language is selected, you will be requested to select it the next time the machine is started.
15. The machine is heating-up.Automatic rinse/self-cleaning cycle When warm-up is completed, the machine automatically performs a rinse/ self-cleaning cycle of the internal circuit with fresh water. This takes less than a minute.
16. Place a container under the dispensing spout to catch the small amount of water which will be dispensed.
17. This page will be displayed. Wait for the cycle to finish automatically.
    Note: You can stop dispensing by pressing the “ESC” button.
18. When the above steps are completed, the machine shows this display.