Jura E8 Superautomatic Espresso Machine

Place the E8 on a level, water-resistant surface. Follow first-use setup: set language, water hardness, and install the CLEARYL Smart filter. Fill the 64oz (1.9L) water tank with cold water.

Fill the 10oz (280g) bean hopper. Adjust grind size via the dial inside the hopper. The E8's Professional Aroma Grinder is stepless — start at setting 4.

The E8 uses the HP3 Professional Fine Foam Frother — an upgrade over the E6's HP1. The HP3 creates an even finer, more creamy microfoam and operates from a milk pipe system. Attach the milk pipe to the HP3 frother and submerge the intake in cold milk.

The E8 offers 17 specialties including all E6 drinks plus additional milk preparations (macchiato, coffee with milk, hot milk, cold foam). 3D Brewing Technology distributes water at multiple levels through the coffee bed for more even extraction. Intelligent preheating activates the thermoblock before you brew for consistent brew temperature.

17 Specialties — Key Additions vs E6

The E8 adds macchiato, coffee with milk, hot milk, and more intensive flat white options beyond the E6's 11 drinks. All milk drinks are one-touch: connect the milk pipe, select your drink, and the machine handles the rest. The HP3 frother produces finer, creamier microfoam than the HP1 in the E6.

3D Brewing Technology

3D Brewing pulses water at multiple heights through the puck for more even saturation and extraction — particularly noticeable in fuller-bodied coffee drinks. No user adjustment is needed — it operates automatically on every brew.

Intelligent Preheating

The E8 automatically preheats before brewing — it detects when a specialty is about to be prepared and activates the thermoblock in advance. This ensures brew temperature consistency from the first sip without manual warm-up required.

Customizing All 17 Recipes

Each recipe can be individually programmed for volume, strength (5 levels), and temperature (low/medium/high). Milk volume and foam intensity can be set per milk recipe. Hold any button while brewing to adjust volume on the fly and save it.

Daily Milk Rinse

Rinse the HP3 frother after every milk use. Detach the milk pipe, submerge the intake in warm water, and run the rinse. Disassemble the HP3 by twisting counterclockwise from the dual spout — rinse all parts under running water.

Weekly Milk Clean

Run a full milk system clean cycle with Jura milk system cleaner tablets dissolved in 8.5oz of cold water. Follow on-screen prompts.

Machine Maintenance

Run cleaning tablet cycles when prompted. Descale when prompted. Replace CLEARYL Smart filter every 50 liters or when prompted. Empty drip tray and grounds container when indicators show full.

HP3 Frother Not Working

Disassemble the HP3 completely and rinse all parts. Check that the milk pipe is fully connected at both ends. Inspect for dried milk in the nozzle or pipe. Run the milk system clean cycle.

Flat White / Fine Foam Poor Texture

Use very cold full-fat dairy milk. Ensure the HP3 frother components are fully clean and reassembled correctly. Check that no part of the frother assembly is blocked.