← Back to Brand Guides
All Brand Guides
Rocket Espresso Mozzafiato FAST V Espresso Machine

Rocket Espresso Mozzafiato FAST V Espresso Machine

View Product Page

Modernize your espresso setup with the Rocket Espresso Mozzafiato FAST V Espresso Machine. The Mozzafiato's streamlined design sees a fresh update, with flat side panels and beveled top rails to match its new drip tray. Inside, you'll find Rocket's standard heat exchanger layout that ensures efficient heating with simultaneous brewing and steaming. Meanwhile, a new PID controller behind the drip tray and a refreshed brew group design promise improved heat up times over previous models. Other niceties, like a shot timer, soft-touch controls, and an optional eco mode make the Mozzafiato all you need to brew excellent espresso at home.

Warranty
3 Year Manufacturer Warranty
What's In The Box
The Rocket Espresso Mozzafiato FAST V includes: espresso machine, 58mm double-spout portafilter, single and double filter baskets, backflush disc, 58mm tamper, scoop, cup rail, and cleaning brush.

Setup & First Use

Initial Setup

Fill the internal reservoir. Run water through the system without coffee. Allow 25–30 minutes for the machine to reach stable operating temperature. The vibration pump draws from the internal reservoir only — no direct plumbing option.

PID Temperature Control

The Mozzafiato FAST V features a PID controller for precise boiler temperature management. The PID display is mounted on the machine — set your target brew temperature in one-degree increments. Factory default is approximately 200°F (93°C).

Shot Timer

The built-in shot timer starts when the pump activates and displays elapsed time. Use it alongside a scale for recipe development and consistency.

Cooling Flush

Even with a PID, an HX machine can overshoot brew temperature after idle periods. Run a 2–3 second cooling flush before each shot if the machine has been idle for 10+ minutes.

Tutorials & Training

PID vs. Temperature Surfing

The Mozzafiato FAST V's PID eliminates the need for temperature surfing required on non-PID HX machines. Set your target temperature, use a consistent cooling flush protocol, and your brew temperature will be stable and repeatable.

Vibration Pump Notes

The vibration pump produces slightly more noise than a rotary pump. This is normal and expected. Ensure the machine is on a stable surface to minimize vibration.

E61 Group Head Pre-Infusion

Rocket's modified E61 group incorporates pre-infusion — water gently saturates the puck at low pressure before full extraction begins. This is passive and automatic; no settings are required.

Cleaning & Maintenance

Daily Cleaning

Wipe the steam wand and purge after each use. Remove the portafilter and rinse the basket under warm water. Wipe the group head area and drip tray.

Weekly Backflushing

Backflush with the blind basket and espresso cleaner. Run 5–6 cycles of 10 seconds on / 10 seconds off, then 5–6 rinse cycles with plain water.

PID Controller

The PID unit requires no maintenance. If the display becomes hard to read, clean the screen area with a dry cloth.

For warranty support, contact Seattle Coffee Gear at seattlecoffeegear.com/policies/contact-information or call 866-372-4734.

Troubleshooting

PID Not Holding Temperature

Small temperature fluctuations (±2–3°F) are normal. Wider swings may indicate a boiler probe issue

Shot Timer Not Starting

The shot timer activates when the brew switch triggers the pump. If the timer doesn't start, check that the switch is fully engaged.

Shots Running Too Hot After Idle

Apply a longer cooling flush — 3–5 seconds — after extended idle. The HX circuit stores extra heat; the flush removes it before brewing.

Machine Running Dry

Monitor water level in the reservoir and refill before the machine runs dry. Running the pump dry can damage the pump and boiler.

For warranty support, contact Seattle Coffee Gear at seattlecoffeegear.com/policies/contact-information or call 866-372-4734.

About Rocket Espresso
Rocket Espresso

About Rocket Espresso

Rocket Espresso produces hand built espresso machines featuring classic elements of Italian design. With heated E61 groupheads that ensure even extraction, to elements like rotary pumps and PID controllers, Rocket Espresso machines are some of the most sophisticated on the market. These machines represent the closest you can get to bringing the Italian cafe to your countertop.
Brand warranty information

Home Use:

What it Covers: Rocket Espresso home machines and grinders

Length:

  • Espresso Machines: 3 years parts and labor
  • Grinders: 1 year parts and labor

Warranty Point of Contact: Seattle Coffee Gear, read more about Seattle Coffee Gear's Warranty coverage.

Contact Information: 866-372-4734 or email us at service@seattlecoffeegear.com

Can SCG Repair? Yes, read more about our repair services

Care and Maintenance

  • Brush the brew head filter daily.
  • Perform a weekly backflush.
  • Soap out the drip tray and water reservoir weekly.

Commercial Use:


What it Covers: Rocket Espresso commercial machines

Length: 1 year parts, 90 days labor

Warranty Point of Contact: Seattle Coffee Gear, read more about Seattle Coffee Gear's Warranty coverage.

Contact Information: 866-372-4734 or email us at service@seattlecoffeegear.com

Can SCG Repair? Yes, read more about our repair services

Note: Self installation or improper water quality may void your commercial warranty. Please discuss with your commercial sales rep for more information.

Back To Rocket Espresso Guides Shop Rocket Espresso